Video Mix/Effects
Split a Key
82
Split a Key
Sometimes you may wish to use the key cut signal of one source with the key fill or video
signal of another source. For example, you may have a Character Generator creating matte
filled characters, but wish to use a different signal to fill the characters. A split key is used to
accomplish this.
Note:
On GV Switcher systems, the Source Select buses by default tally the
key fill signal.
A split key can be created three different ways:
•
Configure a source in the Eng Setup/Source Destination menu that uses different video
for cut than for fill. That split key will initially be used whenever that engineering source
is selected. See the
Kayenne/Karrera/GV Korona Installation and Service Manual
for more
information.
•
Setup a key patch (an implicit split key). This split key is used whenever that logical
source is selected, and adds operational flexibility (see
Patch a Key Input from Another
Source
, on page 48).
•
Setup an explicit split key using the Source Ops menu. This split key is used only at the
time is has been set. Selecting a different source, then returning to that formerly split
source removes the split key.
To create an explicit split key:
1
Select
Source Ops
,
MEs
.
2
Select an ME button (left).
3
Select the Cut signal data pad for the Keyer you wish to split (highlights blue).
4
Select a source from the scrolling Source List (right) and select that source.
Summary of Contents for GV KORONA
Page 16: ...Table of Contents xvi ...
Page 38: ...40 ...
Page 122: ......
Page 406: ...Kayenne Karrera GV Korona User Manual 409 ...
