GRASS VALLEY GV KORONA User Manual Download Page 351

Page: 351 / 415

Kayenne/Karrera/GV Korona

User Manual

355

Modify a Still

To find and modify stills without loading them to a channel:

Toggle the

Auto Load

button to off.

Select the

Scroll Image List

soft knob button data pad to display the Enter an Image ID

to go to keypad.

Enter an image number, then select

Enter

Set Freeze Mode

In interlaced formats, Freeze Mode can be set to Frame, Field 1, or Field 2. This is very useful

if you need to eliminate motion flicker or artifacts from an interlaced still.

Select a still from the scrolling list.

Toggle the

Capture Still

button off.

Select the

Freeze Mode

button.

Viewing the still on a monitor, select the

Frame

Field 1

Field 2

buttons to change the

mode for the best result.

Select the

Confirm

button.

Kayenne Image Store Device Control

Stills can be controlled from both the DCM (Device Control Module) and the System Bar on

the Control Panel.

Summary of Contents for GV KORONA
































































































































































































































































































































































































































Search results

Summary of Contents for GV KORONA

Reviews:

GRASS VALLEY GV KORONA, User Manual, Page: 351 / 415

Search results

Summary of Contents for GV KORONA

Reviews: