GRASS VALLEY GV KORONA User Manual Download Page 31

Page: 31 / 415

Panel Preferences

Panel Preference Settings

Panel Preference settings define the Control Panel delegation, appearance, and behavior.

You can customize Panel Preferences to best fit your workflow.

About Control Panel Default Button Mapping

Video inputs are mapped to Source Selection and Local Aux Bus Control Panel buttons.

Default mapping includes one-to-one logical input mappings, for example inputs labeled

1-28 to Source Select buttons 1-28 (on a 35 button panel) or Aux 1- Aux 96 with a Local Aux

panel (Kayenne/Karrera).
There are four default M/E outputs delegated for reentry (as inputs) per shifted row (1st row

M1 A - M4 A, 2nd row M1 C - M4 C, etc.), 2nd and 3rd Shift Levels, and Delegation buttons.

Note:

Default button mappings can be restored by clearing NV Memory.

Button mappings can be changed in the Button Mapping menu and saved in the User

Setups, Panel Prefs menu. The same source can be mapped to one or many buttons. Button

mapping is also used to assign Aux buses to delegation buttons, referred to as “Aux

Delegate Mapping”.
Operators often map groups of sources together, like cameras, character generators, Image

Store and ClipStore Channels, and other kinds of like sources. An operator might setup the

source buttons in the order they plan to switch a show.

Summary of Contents for GV KORONA
































































































































































































































































































































































































































Search results

Summary of Contents for GV KORONA

Reviews:

GRASS VALLEY GV KORONA, User Manual, Page: 31 / 415

Search results

Summary of Contents for GV KORONA

Reviews: