Advanced Operations
Insert External Device Control Commands in Macros
304
Insert a Macro Delay
1
Select the
Insert Delay
button.
2
Select the
Enter Delay
data pad and enter the value in the pop-up numeric keypad, for
Fields or Frames or Seconds.
3
Select
Enter
.
Insert External Device Control Commands in Macros
You can insert actions into macros using Macro Builder to trigger an event such as play or
stop. You can also trigger parameter setting changes like a time code or a mark-in point; a
dialog will display for actions with editable parameters when selected.
1
Select
Macros
,
Catalog
in the menu, and select a recorded macro.
2
In the Macro Edit/Build pane (lower right side of menu) select the
Edit
button.
3
In the Macro Builder pane (right edge of menu) select the
Insert New Line
button.
4
Select
Devices
, then
Control
.
5
Select an external device.
6
Select an action; for editable parameters, enter those parameters in the pop-up dialog.
7
Select
Apply
(bottom right).
Result: The macro line is inserted into the Macro Editor.
8
Select
Save
.
Create a New Complex Macro
Creating a new macro can be done in the Macro Editor (not the Macro Builder), however it
may not be practical. It is recommended that you learn about Tiers, Groups, and
component locations using existing macros first.
1
Select an empty macro register in the Macros, Catalog menu.
2
Select the
Insert New Line
button in the Macro Line Edit menu, the Component Edit
menu is displayed.
3
Choose the Tier 1, Tier 2, Tier 3 (if necessary) levels by selecting those buttons.
4
Choose the Group, Location, and Component by selecting those buttons.
5
Select the Edit Value button to set the value for the component.
6
Select Apply.
7
Select Save.
Summary of Contents for GV KORONA
Page 16: ...Table of Contents xvi ...
Page 38: ...40 ...
Page 122: ......
Page 406: ...Kayenne Karrera GV Korona User Manual 409 ...