GRASS VALLEY GV KORONA, User Manual, Page: 139 / 415

Kayenne/Karrera/GV Korona
User Manual
141
Macro Button Function Summary
The Macro button on the Control Panel (one per Source Select Module), delegates keyer
source select button Rows 1 and 2 for macro operations and reports that macro mode is
active (MCR appears in the bus display). To delegate one bus row for macro operations,
press and hold down the Macro button, then press a bus delegation button for the row to
be delegated. MCRO appears in the bus display reporting that the row is active for macro
operations. Macro names, when displayed, will also appear on the bus row(s).
The Rec button activates or terminates macro Record mode. In this mode, you select the
macro register into which you wish to record, using the delegated keyer row, perform the
desired actions, and then finish the recording by either pressing the Rec button again or
pressing the newly recorded macro register button.
During a macro recording, time delays can be inserted into macros. The Insert Delay button
activates macro Insert Delay mode. In this mode the macro delegated M/E’s source name
displays show time durations which can be selected by pressing the corresponding keyer
buttons.
The Delete button activates macro Delete mode. When delete mode is on, pressing a macro
button deletes the macro associated with that button.
When macro mode is on, pressing the Repl Attach button activates attach mode. You then
select the macro register of the desired pre-defined macro and press the button to which
you wish to attach that macro.
The Show Attach button activates a mode that low tally blinks Control Panel buttons that
have macros attached.
The Attach Enable button enables and disables all macro button attachments globally.
When on, pressing Control Panel buttons with macros attached will run those macros.
When off, macros can only be played back by activating macro mode and pressing the
macro register buttons, or with the Macro menu.
Record a Macro
1 Turn on Macro record mode by pressing the Rec button.
2 Press the macro row button of the desired macro register. Use the Shift button to access
shifted macro registers.
3 Perform the steps you wish recorded into the macro, in the order they are to be
performed, using the Control Panel and/or the menus.
4 Complete the recording by pressing the Rec button, or pressing the keyer row Macro
button.
Insert a Macro Delay
The 2nd Shift button (3rd and 4th are undefined for this function) splits the time interval
selection between fields (upper key row) and seconds (lower key row). Multiple selections
can be made to insert longer delays in both fields and seconds.
1 While recording a macro, press the Insert Delay button.
2 Press the keyer source select button of the desired delay time.