GRASS VALLEY GV KORONA, User Manual, Page: 257 / 415

Kayenne/Karrera/GV Korona
User Manual
259
R-MEM Menu
The R-MEM menu has a Router Destinations pane on the left showing the switcher sources,
router sources and destinations, and protection status. Switcher sources configured as
routed sources also appear in the left pane. There is a Mode pane in the center and an
R-MEM pane on the right listing the R-MEM registers available (the full register number is
displayed on each register button).
R-MEM Auto Recall
The R-MEM Auto Recall mode acts similar to the E-MEM Auto Recall. An R-MEM Auto Recall
automatically changes only the switcher sources that were enabled when the register was
learned.
Preview
When Preview mode is turned on, recalling a register will only display the R-MEM settings
stored in that register. No switcher sources will change. This allows you to see what switcher
sources will be affected by a register recall, and what the router sources and destinations
will be after the recall.
When Preview is turned off, the left pane returns to displaying the current status, including
any previously set enables.
Learn an R-MEM Register
1 Enable the switcher sources to be affected by R-MEM in the left pane. Selected switcher
source buttons are green on the left. Only the selected sources will be saved to the
R-MEM. You can use the Enable All button to select all or none of the switcher sources
(toggle).
2 If you want the register to use Auto Recall, select the Auto Recall button so its indicator
illuminates.
3 Select the Learn button in the Mode pane.
4 Select the numbered Bank and Register buttons in the right pane to save the
information to the selected register. Select the bank button first if you are saving to a
different bank. If the desired bank is already selected, you can select just the Register
button.
Recall an R-MEM Register
1 Make sure the Preview mode button is not selected.
2 Turn the Auto Recall button on or off to control how the register is recalled.
3 Select the Bank and Register buttons for the desired register. Select the bank button
first if you are recalling from a different bank, or just select the Register button if in the
same bank.
a If the Auto Recall button is on, the sources selected when the register was saved
(with Auto Recall on) will be changed to the R-MEM values of that register. If Auto
Recall was not on when the register was saved, the currently selected switcher
sources will be changed.