GRASS VALLEY GV KORONA, User Manual, Page: 66 / 415

Suite Preferences
About Register-Based File Ops Menus
68
saved locally to the Frame C: drive cannot be renamed. If you try to rename an E-MEM file
on the Frame C: drive an error message will appear in the message area. If for some reason
an E-MEM file needs to be renamed, copy it to a local drive and rename it.
Each menu is similar to the other File Ops menus with the System and Remote Storage
menu tabs on the left and the same navigation and action buttons in the center.
Register pane buttons:
• All —all registers are loaded.
• Enter Reg(s) —when selected, displays a Registers (s) data pad allowing you to enter
serial registers or an exact range of registers, for example 2-4,6,8-9 using the Next (,)
and Thru (-) buttons.
Note: Excluding empty registers reduces load times.
• Select Reg(s) —allows you to select one or multiple (using the Multi-Select Utilities
button) E-MEM registers from the System or Remote Storage menu tab directories.
• Start Register —when enabled, allows you to start one or a multiple registers at any
register number. Subsequent registers will be offset from the Start Register value.
Save Files in Register-Based Menus
Save operations for the Panel MEM, E-MEM, Macros, Cues, and Router MEM menus are
identical. Saving E-MEM files will be described in this example.
Note:
Selecting a register file in the System or Remote Storage menu tab
and selecting
Save
overwrites the file.