GRASS VALLEY GV KORONA, User Manual, Page: 238 / 415

Device Control
Local Aux Module
240
Macro
Key
Rtr
Macro
Key
Rtr
Hold
and backup tapes, for example).
Note: The Kayenne Gang function does not synchronize multiple
devices and there is a possibility devices may not respond to a Play or
Stop command at precisely the same time. This may cause a slight offset
in playback of multiple clips.
21 22 23 24 25 26 27 28
21 22 23 24 25 26 27 28
W iipe 3Ø Tra n
s
Lock
Local Aux Module
Set up a Gang for Control
1 Press one of the Gang buttons on the Local Aux Module (right). GANG is displayed in
the top row however the button displays are blank. The bottom row display shows
sources mapped to buttons on the Local Aux Module, in the Panel Prefs, Button
Mapping menu. Buttons are colored white and are low tally.
2 Press the source select buttons of the devices to be ganged. The source select button
for each device will change to green, high tally as they are pressed.
The gang is dynamic so toggling sources on and off adds/removes them from/to the
gang.
3 Press the Gang button again to exit the Gang mode. The gang remains.
About System Bar Gang Control
Gangs can be controlled using the right-most Device Control Group on the System Bar. Play,
Cue/Load, and Previous and Next commands are all supported (see System Bar , on
page 237).
The Device Control Module
Panel Gangs (Local Aux Bus gangs) can also be controlled with the optional Device Control
Module. Stop, Play, Rew, Fast Fwd, Forward Jog, Reverse Jog, Mark, etc. are operational in
Gang mode (see Device Control Module , on page 244). Panel Gangs and the gang on the ‘F’
button (of A-F) are the same when the SDEL button is selected. Gang device selections
made in the Device Control Module affect gang selections in the Local Aux Bus Module and
vice versa.
8623
267
_2
21 22 23 24 25 26 27 28
21 22 23 24 25 26 27 28
W iipe 3Ø
Tra n
s
Lock