Kayenne/Karrera/GV Korona
User Manual
279
Perform a Modify All Operation
1
Delegate for editing the levels in the effect you wish to be affected by the
modifications.
2
Move the time cursor to the location in the effect you wish to use as a baseline for the
operation.
3
Change the desired parameters by pressing a button, turning a knob, or entering a
value with the key pad.
4
Perform the desired relative or absolute modify operation:
•
To make relative changes, access the Timeline Edit menu by selecting
E-MEM &
Timeline
,
Timeline Edit
, then select the
Mod All Relative
button. The relative changes
of the modified parameters will be applied to all the affected keyframes in the effect.
•
To make absolute changes, access the Timeline Edit menu by selecting
E-MEM &
Timeline
,
Timeline Edit
, then select the
Mod All Absolute
button. The absolute values
of the modified parameters in the work buffer will be applied to all the affected
keyframes in the effect.
Note:
When using the Modify All Absolute feature, it is recommended
that only one parameter at a time is modified to prevent, for example, all
keyframes being moved to the same position.
About E-MEM Learn Auto Recall
Each E-MEM register contains header information, along with keyframe data. Header
information applies to the entire effect and is not keyframable. Register header information
includes:
•
E-MEM enable group button selections (for Auto Recall)
•
Effect Dissolve state (on or off)
•
Effect Dissolve rate (seconds, frames, field)
When an effect is edited in the standard manner (Insert Before/After, Modify Keyframe,
Modify All), only keyframe data is affected. The header information does not change. In a
standard Learn operation, all existing keyframe data is overwritten with a single keyframe,
and new header information is saved.
Update E-MEM Register Header Information
Learn Auto Recall can be used to update E-MEM register header information without
changing keyframe data.
1
In the Master E-MEM Module of the Control Panel, select the state of the desired header
information.
2
Press
LRN
,
Auto Recall
.
Set the Enable Groups Associated with Auto Recall
Levels of the switcher can either be included or excluded from Auto Recall using the level
buttons in the Master E-MEM Module of the Control Panel.
1
Press
Auto Recall
in the Master E-MEM Module so it is on.
2
Press to enable the level buttons in the Master E-MEM you wish to include with Auto
Summary of Contents for GV KORONA
Page 16: ...Table of Contents xvi ...
Page 38: ...40 ...
Page 122: ......
Page 406: ...Kayenne Karrera GV Korona User Manual 409 ...