GRASS VALLEY GV KORONA User Manual Download Page 289

Page: 289 / 415

Kayenne/Karrera/GV Korona

User Manual

293

For a new register, press and hold the cyan (light blue) Lrn button in the Local or

Master E-M/EM Module, and press a register button.

To edit an existing register, select the

Update Sub Levels

button.

Once the sub-level is defined to a level, an effect can be learned with this relationship.

When that effect is recalled, the level/sub-level relationship will be reestablished.

Note:

The Delegate All Enabled button’s default is ‘On’. If you choose to

toggle this button to off, you must select the Delegate Enabled button,

top right of menu to delegate enabled choices. Otherwise, the enabled

sub-levels will not be part of the inserted keyframes and therefore not

part of the effect.

Defined sub-levels are appended below the assigned levels (if present). Aux 1, Aux 2, Aux 3,

and Aux 4 have been appended.

Summary of Contents for GV KORONA
































































































































































































































































































































































































































Search results

Summary of Contents for GV KORONA

Reviews:

GRASS VALLEY GV KORONA, User Manual, Page: 289 / 415

Search results

Summary of Contents for GV KORONA

Reviews: