GRASS VALLEY GV KORONA User Manual Download Page 376

Page: 376 / 415

Advanced Operations

Enable Image ReStore

380

Editing Files in Image ReStore

Stored files are located in the Image Store, Library, From Image Store menu tab, in the

Default/ReStore folder. You could for example, copy an additional file to the directory or

delete files that you do not want restored.
Stored images can be edited using the Image Store Library, Image Store File Operations.

See the Image Store section in the

Kayenne/Karrera/GV Korona User Manual

for more

information.

Configure a Networked PC for Image Store File Sharing Windows

For Windows 7 and Windows 10, you can transfer properly labeled image files of a

supported format from a networked PC or USB Storage Device to the Image Store Cache.

However, the PC network security must be configured for access.

CAUTION: If the network is part of a domain or you are unable to access

shared folders across a network, contact your local Systems

Administrator.

Create an Images Directory and Configure it for Sharing

Create a folder in C:\ and name it Images.

Right-click on the Images folder and choose

Share with

, and select

Specific people

...

from the pull-down menu.

Click on

Everyone

and verify that the Owner pull-down is set to Read/Write.

Click

Share

Summary of Contents for GV KORONA
































































































































































































































































































































































































































Search results

Summary of Contents for GV KORONA

Reviews:

GRASS VALLEY GV KORONA, User Manual, Page: 376 / 415

Search results

Summary of Contents for GV KORONA

Reviews: