GRASS VALLEY GV KORONA User Manual Download Page 359

Page: 359 / 415

Kayenne/Karrera/GV Korona

User Manual

363

Create an E-MEM Trigger Cue

A cue point, different from a Mark In point, can be defined with a KF Trigger. An example of

this application would be to have an E-MEM recall a movie and cue it at midpoint, play the

movie, and have it loop from Mark In and Mark Out points after the cue point.

With KF Trigger enabled, select the Cue button. A data pad will appear next to the

button.

Select the data pad. A numeric keypad will open, allowing you to enter a movie frame

location. The default value will be the current Mark In location.

Select Enter on the keypad. The cue value is stored and inserted as part of the

keyframe.

Note:

Turning Cue off and back on will re-enter the current Mark In

location for that Cue.

Record a Movie

Movies are recorded by selecting an Image Store channel, selecting a video source,

specifying any recording options, making the recording, inspecting the recording

(optional), and then committing that recording to the cache with the Keep button.

Select an Image Store channel for recording.

Select an Input then choose the video source to be recorded.

Select the

Show E-E

button. The current movie or clip on that Image Store channel, if

loaded, will be unloaded in preparation for recording. The incoming video will be

displayed on the output of that Image Store channel. The Show E-E button legend

changes to

Record

Define the options you wish to apply to the recording:

•

Video & Key

Video only

•

Record Time (optional duration of the recording).

Select the Record mode button to initiate the recording, and then either press Record

again to stop the recording, or let the movie record until the Record Time duration is

reached.

You will now be able to cue and play the candidate recording to see if it meets your

requirements.

Note:

The movie recording is not saved to cache. If upon inspection the

recording isn’t correct, you can select the

Show E-E

button again to

discard that recording and prepare to make another.

Summary of Contents for GV KORONA
































































































































































































































































































































































































































Search results

Summary of Contents for GV KORONA

Reviews:

GRASS VALLEY GV KORONA, User Manual, Page: 359 / 415

Search results

Summary of Contents for GV KORONA

Reviews: