Home
/
GRASS VALLEY
/
GV KORONA
/
User Manual

GRASS VALLEY GV KORONA, User Manual, Page: 252 / 415

Share

Page: 252 / 415

GRASS VALLEY GV KORONA User Manual Download Page 252

Device Control

Features

254

and key signals of a source will be routed to their destinations.

Note:

GV Switcher system router take commands are only applied to all

router levels.The external routing system’s destinations must be

configured with all router levels selected.

Router control panels can also

protect

router destinations from being changed by other

control panels. A protected router destination cannot be changed by a different control

panel, but may be changed by the panel that set the protection. Protections help
prevent inappropriate router source changes. The GV Swither system can be

considered a type of router control panel, and so the GV Switcher system can protect

destinations. GV Switcher system router protect commands are applied to all router
levels.

Features

The names of router sources appear on the GV Switcher system source name displays.

These names originate from the router system, and their text cannot be changed from

the GV Switcher system. If a routed source has no connection to the router, an

X

appears

in place of the router source name. If the router connection exists, but no source has yet

been selected for that destination (which can occur during bootup),

No Src

appears.

•

Interfaces to the Grass Valley SMS 7000 routing system.

•

GV Switcher system configuration of routed sources.

•

Names of router sources are shown on GV Switcher Control Panel source name displays.

•

Router source selection control via the Control Panel, and Menu Panel.

•

Protection types (None, Protect, Protect All, and On Air).

•

R-MEM control.

Menu Panel Router Interface Operation

The Router Control menu provides a way to directly change router sources from the Menu

Panel. The Router Select menu is reached by pressing the

R-MEM

Menu Panel button, then

selecting the

Router Control

category selection button.

Note:

Router interface operation becomes available after the GV

Switcher system and the external router have been properly configured.

See the Installation & Service Manual for your switcher model for

additional information.

«
...
250
251
252
253
254
...
»

Summary of Contents for GV KORONA
































































































































































































































































































































































































































Reviews:

No comments