GRASS VALLEY GV KORONA User Manual Download Page 178

Page: 178 / 415

Switching Basics

Setting Panel Saver Mode

180

Spll

U 1 U 2

BLK

Cutt

Auto

Module Overview

An M/E Stripe has a module for source selection, transition, and individual E-MEM control.

Additional Master E-MEM, Device Control (optional), Multi-Function, and Local Aux

modules are populated to complete the control surface functionality. System operation

information and procedures will be covered more thoroughly later in this chapter.

Source Module (35, 25, or 15)

Portion of Control Panel M/E Stripe

Transition Module

Transition Module

Local E-MEM Module

The Transition Module is organized into two control groups, the main transition controls,

with status display and transition lever arm, and keyer transition controls. For information

about using transitions, see

Transitions

, on page 207.

Main Transition controls:

•

Lever Arm—For manual transitions

•

Status Display—Displays bus and keyer delegation and status

•

Next Transition Element buttons

•

Next Transition Type buttons

•

Cut/Auto Transition buttons with Trans Rate display

•

Transition Preview and Preset Black buttons

Keyer transition controls:

•

K1-K6 (Keyer) Cut buttons

•

K1-K6 Auto Transition buttons

8874_01

Key

Kee

Rtr

Kee

y 1

Cutt

y 1

Autto

y 2

Cuutt

y 2

Autto

Kee

y 3

Cuutt

y 3

Autto

Secc

Ruuless

Holdd

y 5

Cuutt

y 5

Autto

Kee

y 6

Cutt

y 6

Autto

Summary of Contents for GV KORONA
































































































































































































































































































































































































































Search results

Summary of Contents for GV KORONA

Reviews:

GRASS VALLEY GV KORONA, User Manual, Page: 178 / 415

Search results

Summary of Contents for GV KORONA

Reviews: