GRASS VALLEY GV KORONA User Manual Download Page 373

Page: 373 / 415

Kayenne/Karrera/GV Korona

User Manual

377

The Image Store Backup & Restore menu tab provides control of manual and scheduled

backups to local disk and restore from local disk. To access the Backup & Restore menu,

select Image Store, Backup & Restore.

Manual Backup

To manually backup the Image Store Cache locally:

Select the Local Backup Path data pad.

Select to select a target folder by navigating to an existing folder in the navigation

pane (left), or by creating a new target folder:

a Navigate to the desired directory in the navigation pane.

b Select the Create Folder button.

Enter a folder name in the pop-up keyboard.

Note:

Verify the path in the Local Backup Path data button; the target

folder must be open to see the complete path.

Select the Accept button.

Select the Backup Cache Start toggle button to begin the backup operation (border

highlights green).

Schedule a Backup

Use the scheduling controls in the Backup & Restore menu to schedule backups for one,

several, or all days, including the time of day. To access the Backup & Restore menu

scheduling controls, select Image Store, Backup & Restore.

Summary of Contents for GV KORONA
































































































































































































































































































































































































































Search results

Summary of Contents for GV KORONA

Reviews:

GRASS VALLEY GV KORONA, User Manual, Page: 373 / 415

Search results

Summary of Contents for GV KORONA

Reviews: