Station
Station
Station Status
Status
Status Screen
Screen
Screen
The Station Status screen is a visual representation
of the components that are physically installed in a
station. Access this screen from the Stations screen
(see
View the Stations Screen, page 102
).
Only those components that have been created and
configured using the Intelligent Paint Kitchen software
are displayed on the screen. If you switch from one
station to another, the displayed components may
change, depending on each station’s configuration.
Use this screen to view detailed operating conditions
in the selected station and its components. Some
component settings can be changed from this
screen, as described in the table below. You can
also navigate directly from this screen to the Pump
Status screen, the Primary Tank Status screen, the
Secondary Tank Status screen, and the Agitator
Status screens, for any components present in the
selected station.
3
2
11
12
13
1
5
6
14
15
16
17
18
7
8
9
10
4
Figure 83 Station Status Screen
Ref.
Ref.
Ref.
Item
Item
Item
Description
Description
Description
1
Station Number
Displays the number of the station for which information is displayed.
Press to display a keypad and select a different station to view.
2
Secondary Agitator
Speed
Displays the operating speed (in RPM, Hz, or %) of a secondary electric
agitator installed in the Secondary Tank.
Press to display a keypad and change the agitator speed.
3
Station Name
Displays the name of the currently selected station.
4
Enable Secondary
Agitator
Press the image of a Secondary Tank to display the Secondary Agitator
Enable popup screen. Use the popup to enable or disable the selected
agitator.
If the agitator is operating, its blades are shown in motion on this screen.
104
3A4030C
