![background image](http://html1.mh-extra.com/html/graco/25a693/25a693_instructions-manual_2251038073.webp)
Set
Set
Set Up
Up
Up Primary
Primary
Primary Tanks
Tanks
Tanks
Each station contains one Primary Tank (G) , which
provides the fluid that is pumped throughout the
circulation system. Every Primary Tank must be
individually configured.
Use this procedure to specify the Primary Tank
installed in one specific station. If the system contains
multiple stations, use this procedure separately for
the Primary Tank in each station.
NOTE:
NOTE:
NOTE: When Tank Volume is configured (see
Configure Primary Tank Volume, page 77
), the
screen displays the estimated volume with the
tank level percentage. When the Tank Volume is
not configured, only the tank level percentage is
displayed.
Figure 68 Primary Tank Screen
1.
Press
on any Run screen to enter the Setup
menu screen.
2.
Press Primary
Primary
Primary Tank
Tank
Tank.
3.
On the Primary Tank screen, press the Station
Station
Station
Number
Number
Number field.
4.
On the Station
Station
Station Number
Number
Number keypad, enter the number
of the station to be configured.
The number in the field is the station that is
being configured. The station name is displayed
directly below the Station Number.
5.
Press each item’s data field and use the keypad
that displays to specify the equipment used in
the selected station. For a list of fields, see
Fields on the Primary Tank Setup Screen
.
NOTE:
NOTE:
NOTE: For a newly-created station, all fields read
No
No
No or None
None
None.
6.
Repeat steps 3–6 for each additional station in
the system.
3A4030C
73