Set
Set
Set Up
Up
Up Tank
Tank
Tank Control
Control
Control Modules
Modules
Modules
Each station may contain a Secondary Tank (H),
used to provide fluid to the Primary Tank (G).
Secondary Tanks may have any or all of a Radar
Level Sensor (T), Agitator (R), and Pneumatic
Remote Transfer Fill Pump (N) used to control the
fluid supply operation. That set of components must
be configured for each station.
Use this procedure to specify the Secondary Tank
components installed in one specific station. If the
system contains multiple stations, use this procedure
separately for each station.
Figure 67 Tank Control Setup Screen
1.
Press
on any Run screen to enter the Setup
menu screen.
2.
Press Tank
Tank
Tank Control
Control
Control Module
Module
Module.
3.
On the Tank Control Setup screen, press the
Station
Station
Station Number
Number
Number field.
4.
On the Station
Station
Station Number
Number
Number keypad, enter the number
of the station to be configured.
The number in the field is the station that is being
configured in the following steps. The station
name is displayed directly below the Station
Number.
5.
Press each item’s response field and use the
keypad that displays to specify the equipment
used in the selected station. For a list of fields,
see
Fields on the Tank Control Setup Screen
NOTE: For a newly-created station, all fields read
No
No
No or None
None
None.
6.
Repeat steps 3–6 for each additional station in
the system.
Table
Table
Table 6
6
6 Fields
Fields
Fields on
on
on the
the
the Tank
Tank
Tank Control
Control
Control Setup
Setup
Setup Screen
Screen
Screen
Item
Item
Item
Description
Description
Description
Station Number
The current station number being displayed:
• 1–Maximum number of stations
Station Name
The alphanumeric name of the current station being displayed:
• 0–20 characters
3A4030C
71
