![background image](http://html1.mh-extra.com/html/graco/25a693/25a693_instructions-manual_2251038062.webp)
Button
Button
Button
Description
Description
Description
Supervisor
Configuration
Press to display the Supervisor Configuration screen, used to access these Intelligent
Paint Kitchen software functions:
• View the status of each Supervisor Box in the system.
• View or edit the IP address and the subnet mask, and the gateway used by the
Supervisor network.
• Ping the Supervisor network to confirm communication.
For more information, see
Configure the Supervisor Module, page 93
.
HMI Configuration
Press to display the Display Configuration screen, used to view or edit the
Modbus/TCP network configuration for port 1 and port 2. Follow the procedure in
Configure the Display, page 92
.
Press to display the Email Setup screen, used to specify email addresses
to which notification of system events are sent. Follow the procedure in
Expansion I/O
Settings
Press to set the language, screen saver, time format, and time settings; and to access
the Utilities, Versions, and Diagnostic menus.
• Press Screen
Screen
Screen Saver
Saver
Saver to set up the screen saver on the Touchscreen interface. Use
this feature to set the inactive time after which the screen saver is displayed.
• Set the time and the date. See
Set the Time and Date, page 136
.
• Press Utilities
Utilities
Utilities to display the Utilities Menu screen, used to access these Intelligent
Paint Kitchen software functions:
– Format and use an SD card in the Touchscreen Module. See
.
– Format and use a USB drive in the Touchscreen Module. See
.
– Test the Touchscreen interface to see if calibration is needed.
Format and use an SD card in the Touchscreen Module. See
Test the Touchscreen Interface, page 133
.
– Calibrate the Touchscreen interface.
See
Calibrate the Touchscreen Interface, page 134
• Press Versions
Versions
Versions to display the Versions screen, used to view the current version
numbers of the software used by the Intelligent Paint Kitchen, the Pump
Control Modules, and the Tank Control Modules. Follow the procedure in
View Software Versions, page 133
.
• Press Diagnostic to display the Diagnostic Menu screen, used to view and check
diagnostic information for a selected station.
Password
Press to create a password to prevent unauthorized users from changing Intelligent
Paint Kitchen settings. See
to set up or change the
password. See
to access password-protected screens.
62
3A4030C