Graco 25A693, Instructions Manual

Page: 121 / 166

Events and Logs
Events Events Events and and and Logs Logs Logs
System errors alert you of a problem and help
prevent failures in the Intelligent Paint Kitchen from
occurring. There are three types of events: Advisory,
Deviation, and Alarm.
An Advisory Advisory Advisory records an event in the system and
clears itself after 60 seconds. The four digit code is
followed by “-V”.
A Deviation Deviation Deviation records an error in the system but does
not shut down the equipment. The deviation must
be acknowledged by the user. The four digit code
is followed by “-D”.
If an Alarm Alarm Alarm occurs, operation of the affected station
stops. The four digit code is followed by “-A”.
If any of the system error types occur:
• Alarm buzzer sounds (unless in silent mode).
• Alarm popup screen shows the active alarm code
(see Error Codes, page 123 ).
• Status bar on the Advanced Display Module shows
the active alarm code.
• Alarm is saved in the date/time stamped log.
A Record Record
Record saves relevant system events in the
background. These are informational only and can
be reviewed on the Events screen, which displays
the 200 most recent events, with date, time, and
description.
Use the following procedures to set up and specify
how events are generated and responded to.
Set Set Set Up Up Up Events Events Events
Use this procedure to specify how Intelligent Paint
Kitchen events are handled by the system. You can
specify how events are handled for different parts of
the pump system from the Pump Events screen.
• Press IO IO IO Status Status Status to set up I/O status events.
• Press Display Display
Display to set up events as they display
onscreen.
• Press Pump Pump
Pump 1
1
1 to set up event handling for the first
pump in the system.
• Press Pump Pump Pump 2 2 2 to set up event handling for the
second pump in the system.
Respond Respond
Respond to
to
to Events
Events
Events
NOTE: NOTE:
NOTE: When a deviation or alarm occurs, be
sure to determine the error code before resetting
it. If you forget which code occurred, go to the
View the Event Log, page 122 , to view the last 200
errors, with date and time stamps.
If an alarm has occurred, correct the cause before
resuming operation.
On the Event screen, do one of the following:
• Press Acknowledge Acknowledge Acknowledge to reset the displayed event.
• Press Acknowledge Acknowledge
Acknowledge All
All
All to reset all current
Intelligent Paint Kitchen events.
3A4030C 121