Installation and Operating Instructions
www.cranebsu.com
Every effort has been made to ensure that the information contained in
this publication is accurate at the time of publishing. Crane Ltd assumes
no responsibility or liability for typographical errors or omissions or
for any misinterpretation of the information within the publication and
reserves the right to change without notice.
•
Approved to BS EN 331: 1998
•
Designed and manufactured under quality management
systems in accordance with BS EN ISO 9001:2008
FM311 ISO 9001
11-15 EPSILON TERRACE,
WEST ROAD, IPSWICH, IP3 9FJ
HOME SALES: +44 (0)1473 277410
EXPORT SALES: +971 4816 5800
TECHNICAL HELPLINE: 0845 604 1790
FAX: +44 (0)1473 277411
EMAIL: [email protected]
EMAIL: [email protected]
www.hattersley.com
Fig. C31
Bronze Gate Valves
•
Gate valves provide complete shut off,
providing the seats remain undamaged,
and offer very little resistance to flow in
the open position. Gate valves are best
suited to infrequent valve operation,
as any dirt in the system can cause
scuffing of the seats. Gate valves are
not recommended for use in the partially
open position because vibration and
erosion of the disc may occur.
•
Service temperature and pressure
indicated on the identification plate or
body marking should not be exceeded.
•
Hattersley gate valves have not been
designed as fire safe valves.
•
Valves must be installed into a well
designed system and it is recommended
that the system be inspected in
accordance with the appropriate
member state legislation.
H_C31_0117
IOM_004B00C31D799