Gerber SOLARA UV2, Owner'S Manual

Page: 90 / 163

CHAPTER 5 90
Printing Jobs on the GERBER SOLARA UV2
4
Give the custom material a name and enter the width of the sign blank plus
0.5"/12.7mm (for the bleed margin) in the Width box. Leave the default height as is
(3937.0"). Choose Sheet as the material Type. Click OK.
5
Select the printer to which the job will be sent and click the Change… button to
display the Change Media and Placement dialog box.
6
Choose the Media Configuration Name (color profile), Media type, and page size that
matches the custom material you previously created.
7
Select
Print Jobs Individually
from the Placement drop-down menu and click the
Setup button to open the Placement Strategy dialog box.
8
Turn off Automatically start printing and select Right Justification. In the Top field of
the Offset box, enter the length of the leading edge extension piece. This instructs the
printer to print nothing (white space) on the extension. Click OK to close the dialog
box.
9
Print the job as you normally would.