Gerber SOLARA UV2, Owner'S Manual

Page: 77 / 163

CHAPTER 5 77
Printing Jobs on the GERBER SOLARA UV2
UV lamp extension (3 minutes)
The UV lamps are designed to automatically turn off after the carriage sits at the home position
for one minute. You can extend the time the UV lamps remain on for an additional 3 minutes by
using the UV lamp extension option. This will give the user more time to send additional jobs or
change material without having the lamps turn off and have to cool down. You can only use the
3 minute extension option once between jobs.
Note: You can only use the 3 minute extension option ONCE between jobs. This is to keep the
UV lamps and internal components of the printer at optimum operating temperature.
To enable 3 minute lamp extension
1
From the MAIN MENU press F4, Operate to open the OPERATION menu.
OPERATION
Material Lamps F3
Ink Job
ENTER for Main Menu
2
Press F3, Lamps to display the UV LAMPS menu.
You will see 1 of 3 possible displays. All options in parentheses ( ) are disabled.
UV LAMPS
Life Low Life Used
(Turn Off) (EXTEND)
LAMPS OFF
UV LAMPS
Life Low Life Used
Turn Off EXTEND F4
LAMPS ON
UV LAMPS
Life Low Life Used
Turn Off (EXTEND)
LAMPS ON
The lamps are
currently OFF,
therefore the
EXTEND option
has been disabled.
Lamps OFF
Extension
unavailable
The lamps are
currently ON,
Press F4 to activate
the 3 minute lamp
extension.
Lamps ON
Extension available
The lamps are
currently ON,
however the
3 minute lamp
extension has
already been used
once so the option
has been disabled.
Lamps ON
Extension
unavailable
Note: All options in parentheses ( ) are currently disabled.