Gerber SOLARA UV2, Owner'S Manual

Page: 37 / 163

CHAPTER 3 37
Setting up the GERBER SOLARA UV2
To enter an activation code
1
Obtain a valid activation code from Gerber or a licensed Gerber Distributor.
Activation codes consist of twelve rows of alphanumeric combinations.
2
Open a web browser menu on a computer connected to the printer.
(The internet connection does not have to be active.)
3
Enter the IP Address for the specific GERBER SOLARA UV2 you wish to access as the
web address in the web browser and press enter. (Do not use any slashes or colons.)
4
If done correctly the Home page should appear on your web browser. Click on the
Activation link to access the GERBER SOLARA UV2 activation page.
5
Copy and Paste (or re-type) all twelve rows of code into the appropriate text box on
the Activation web page. (Do not include any other words or any extra spaces)
6
After you have entered the code, click on the SUBMIT CODE button. The web page
should refresh and display one of the following messages:
♦
ACTIVATION COMPLETE
This means the code has been accepted and the amount of print-hours has been
updated accordingly. Close the web browser to exit and begin printing.
♦
ACTIVATION INVALID
This means the submitted code was not valid or not entered correctly. Click the
Refresh Status button and re-enter the code. (Do not include any extra spaces)