Gerber SOLARA UV2, Owner'S Manual

Page: 144 / 163

CHAPTER 7 144
Troubleshooting
15
Moisten a swab with several drops of GERBER SOLARA UV2 Cleaning Solution and
blot excess using a lint-free cloth. Gently wipe the primed print head from back to
front one time. Repeat the swabbing procedure using a new swab moistened with
Cleaning Solution for each print head that has been purged. Dispose of used swabs
according to local laws and regulations.
Swab the print head from
back to front
Inner head shutter
16
Press ENTER when done and the display changes to:
CLOSE Inner
Head Shutter
ENTER when done
17
Close inner head shutter by sliding it forward until it clicks into place. Press ENTER
when done and the display changes to:
Remove lint-free
wipe and close
Outer Priming Door.
ENTER when done
18
If lint-free wipe is saturated, remove it and dispose according to local laws and
regulations. Press ENTER when done and the display changes to:
CLOSE WASTE Valves
for all inks and
empty waste bottle.
ENTER when done