Gerber SOLARA UV2, Owner'S Manual

Page: 143 / 163

CHAPTER 7 143
Troubleshooting
11
Open the priming door at the left side of the printer and install a lint-free wipe
(absorbent pad) in the tray.
Head shutter handle in
closed position. Slide
backward to open.
Lint-free wipes in tray
Outer priming door
12
Press ENTER when done. The display changes to:
OPEN INNER
Head Shutter.
ENTER when done
13
Open the inner head shutter by sliding it back to expose the print heads. Press ENTER
when done. The Purge cycle begins automatically and the display changes to:
Purge Cycle: 1
Filling ink lines…
(CANCEL key Aborts)
14
During the Purge cycle, ink will drip from the print head of the line that is being
cleared onto the lint-free wipe. The display shows the number of purge cycles on the
first line. When complete the display changes to:
Gently swab the
bottom of the heads
with the swab tool.
ENTER when done