Gerber SOLARA UV2, Owner'S Manual

Page: 56 / 163

CHAPTER 4 56
Loading Inks and Materials
16
After the beam height has been adjusted correctly, the GERBER SOLARA UV2
displays the following message if the front cover or the shutter door is open:
MATERIAL SETUP:
Close Front Cover
And Shutter or Press
CANCEL for Main Menu
17
Once the front cover and the shutter door are closed, the GERBER SOLARA UV2
displays the following message:
Select material type
Rigid Bleed- F3
F2 -Vinyl Rigid- F4
(CANCEL to Abort)
18
Press F2 to select VINYL material type.
19
The GERBER SOLARA UV2 will automatically home the carriage and scan the
material to determine its width.
Note: Once the beam height is set for a given material, readjustment should not be required if
the material is moved, realigned, or reloaded.
Using the winding unit
The GERBER SOLARA UV2 is equipped with a roll feed/take-up roll system to maintain
proper positioning of the material during printing. Due to the UV-curable technology there are
no pre- or post-heaters required to dry inks. Printed material may be immediately wound onto
a take-up roll making unattended operation possible.
The winding unit requires standard 110V power.
GERBER SOLARA
UV2 stand
Material sensor
Winding unit
Direction and
Rotation switches
Take-up roller
Take-up roller hub