Gerber SOLARA UV2, Owner'S Manual

Page: 85 / 163

CHAPTER 5 85
Printing Jobs on the GERBER SOLARA UV2
Choosing print job justification
The GERBER SOLARA UV2 gives you the option to position or “justify” your image. You can
select where on the material you would like to position the print job: the left side, the right side,
or in the center.
Note: You can also justify you image(s) using your image RIP software. It is recommended that
you use the same setting in both the RIP software and the printer.
To choose an alignment
1
From the MAIN MENU press F4, Operate to open the OPERATION menu.
OPERATION
Material Lamps
Ink Job F4
ENTER for Main Menu
2
Press F4, Job to display the JOB OPERATION menu.
JOB OPERATION
F1 Justify
Activation Job Info
ENTER for Main Menu
3
Press F1, Justify to display the JUSTIFY JOB menu and the current alignment.
JUSTIFY JOB
+ F3
LEFT - F4
ENTER key to Accept
4
Choose between three different alignment options (LEFT, RIGHT, and CENTER) using
the F3 and F4 keys.
5
Press ENTER to save your new alignment setting. Press CANCEL to return to the
Main Menu without changing the current alignment.