gefran ADV200 WA, Functions Description And Parameters List

Page: 204 / 300

204
ADV200 WA • Functions description and parameters list
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
27.7.3 11258 PID 1 ref function ENUM Ref1 0 5 RW VS
This parameter is used to adjust reference 1 and 2 analog input signals for the PID1 controller:
0
Ref1
1 Ref2
2 Src selection
3
Ref1+Ref2
4 Ref1-Ref2
5 Aver ref1 ref2
Set to 0 to select the value of reference signal 1 as the setpoint for the PID 1 function.
Set to 1 to select the value of reference signal 1 as the setpoint for the PID 2 function.
Set to 2 to select the value of the reference signal 1 or reference signal 2 for the PID 1 function, depending on
that selected in parameter
11260 PID 1 ref sel src
.
Set to 3 to select the result of the following formula as the setpoint for the PID 1 function:
rif1 value+(rif2 value-50% Full scale)
Set to 4 to select the result of the following formula as the setpoint for the PID 1 function:
(rif1 value+50% of Full scale)-rif2 value)
Set to 5 to select the arithmetic mean of reference 1 and reference 2 as the setpoint for the PID 1 function.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
27.7.4 11260 PID 1 ref sel src LINK 16BIT 0 0 16384 RW VS
Selection of the origin (source) of the PID 1 function reference signal between reference 1 and reference 2.
This setting only applies if parameter
11258 PID 1 ref function is set to 3 (Src selection). PID controller refer-
ence signals can be selected from those listed in the “ L_PIDREF ” selection list.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
27.7.5 11262 PID 1 fbk 1 src LINK 16/32BIT 1500 0 16384 RW VS
Selection of the origin (source) of feedback signal 1 for the PID 1 function. The PID controller feedback sig-
nals can be selected from those listed in the “
L_PIDFBK
” selection list.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
27.7.6 11264 PID 1 fbk 2 src LINK 16/32BIT 0 0 16384 RW VS
Selection of the origin (source) of feedback signal 2 for the PID 1 function. The PID controller feedback sig-
nals can be selected from those listed in the “ L_PIDFBK ” selection list.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
27.7.7 11268 PID 1 fbk function ENUM Fbk1 0 10 RW VS
Selection of the operation to be executed on feedback signals 1 and 2 for the PID 1 controller:
0
Fbk1
1 Fbk2
2 Fbk1+Fbk2
3
Fbk1-Fbk2
4 Fbk1*Fbk2
5 Fbk1/Fbk2
6
Min fbk1fbk2