gefran ADV200 WA, Functions Description And Parameters List, Page: 144 / 300

144
ADV200 WA • Functions description and parameters list
Set to
2
to select the value of the reference signal 1 or reference signal 2 for the PID 2 function, depending on
that selected in parameter 7312 PID 1 ref sel src .
Set to 3 to select the result of the following formula as the setpoint for the PID 2 function:
rif1 value+(rif2 value-50% Full scale)
Set to 4 to select the result of the following formula as the setpoint for the PID 2 function:
(rif1 value+50% Full scale)-rif2 value
Set to 5 to select the arithmetic mean of reference 1 and reference 2 as the setpoint for the PID 1 function.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.3.6 7360 PID 2 reference max FLOAT 100.0 0.0 999999.0 RW VS
Setting of the full scale value of the reference in the selected unit of measure.
Important note: when using temperature sensors connected to the EXP-IO_SENS-….-ADV card, this param-
eter must be set to 180 if values are expressed in °C and 356 if expressed in °F.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.3.7 7362 PID 2 ref sel src LINK 16BIT 6000 0 16384 RW VS
Selection of the origin (source) of the PID 2 function reference signal between reference 1 and reference 2.
This setting only applies if parameter
7358 PID 2 ref function is set to
3
( Src selection ). PID controller refer-
ence signals can be selected from those listed in the “
L_PIDREF
” selection list
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.3.8 7364 PID 2 ref filter s FLOAT 0.0 0.0 10.0 RW VS
Setting of the value of the filter applied to the reference signal.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.3.9 7366 PID 2 ref out mon PID2U FLOAT 0.0 0.0 0.0 R VS
The current value of the selected reference is displayed.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.3.10 7370 PID 2 fbk 1 src LINK 16/32BIT 6000 0 16384 RW VS
Selection of the origin (source) of feedback signal 1 for the PID 2 function. The PID controller feedback sig-
nals can be selected from those listed in the “ L_PIDFBK ” selection list.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.3.11 7372 PID 2 fbk 2 src LINK 16/32BIT 6000 0 16384 RW VS
Selection of the origin (source) of feedback signal 2 for the PID 2 function. The PID controller feedback sig-
nals can be selected from those listed in the “ L_PIDFBK ” selection list.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.3.12 7374 PID 2 fbk function ENUM Fbk1 0 10 RW VS
Selection of the operation to be executed on feedback signals 1 and 2 for the PID 2 controller:
0
Fbk1
1 Fbk2
2 Fbk1+Fbk2
3
Fbk1-Fbk2
4 Fbk1*Fbk2
5 Fbk1/Fbk2
6
Min fbk1fbk2
7 Max fbk1fbk2