gefran ADV200 WA, Functions Description And Parameters List

Page: 70 / 300

70
ADV200 WA • Functions description and parameters list
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
16.20 2062 Measured FlxN Wb FLOAT CALCF 0.05 10.0 ERWS VS
Measured rated flux value.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
16.21 2064 Measured FlxX Wb FLOAT CALCF 0.0 0.0 ERWS VS
Measured flux saturation value.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
16.22 2066 Measured P1 FLOAT 0.05 0.0 1.0 ERWS VS
Measured value of the first parameter to define the motor magnetization curve.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
16.23 2068 Measured P2 FLOAT 9.0 3.0 18.0 ERWS VS
Measured value of the second parameter to define the motor magnetization curve.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
16.24 2070 Measured P3 FLOAT 0.87 0.0 1.0 ERWS VS
Measured value of the third parameter to define the motor magnetization curve.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
16.25 2072 Measured Rr ohm FLOAT CALCF 0.0005 200.0 ERWS VS
Measured rotor resistance value.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
16.26 2078 Take tune parameters BIT 0 0 1 ERWZ VS
Saves the motor data calculated by the self-tuning procedure in the drive.
Note !
Data are not saved permanently. Use the “ Save Parameters ” command in the DRIVE CONFIG menu to save in the permanent
memory.