gefran ADV200 WA, Functions Description And Parameters List

Page: 182 / 300

182
ADV200 WA • Functions description and parameters list
9
ALL (All pumps of multidrive system)
NOTE:
You can reset a single pump, and in this case the pump timer is brought to the value set by digital parameter 11364 Pump set
time . You can reset the timer for all of the pumps, and in this case all of the timers are reset and brought to 0.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
27.1.10 11364 Pump Set Time min Enum 0 W VS
Use this parameter to initialize the timer for work hours of the selected pump. If a pump is replaced, you can
initialize the time to a value other than 0 (default).
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
27.1.11 11366 Pump Time Reset Cmd Bool 0 0 1 W VS
Use this parameter to reset the hours counter of pump X or of all the pumps (select with parameter 11362).
0 OFF
1 ON
27.2 I/O CONTROLLER
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
27.2.1 11602 PumpEn1 Connection ENUM 0 0 1426 W VS
27.2.2 11604 PumpEn2 Connection ENUM 0 0 1426 W VS
27.2.3 11606 PumpEn3 Connection ENUM 0 0 1426 W VS
27.2.4 11608 PumpEn4 Connection ENUM 0 0 1426 W VS
27.2.5 11610 PumpEn5 Connection ENUM 0 0 1426 W VS
27.2.6 11612 PumpEn6 Connection ENUM 0 0 1426 W VS
27.2.7 11614 PumpEn7 Connection ENUM 0 0 1426 W VS
Use this parameter to configure the digital output of the controller that enables pump X. With reference to
figure 1, the digital output is Dig Out Start/Stop .
0 OFF
1310
DO1 (Digital Output 1)
1312 DO2 (Digital Output 2)
1314 DO3 (Digital Output 3)
1316 DO4 (Digital Output 4)
1410 DO1X (Digital Output 1 of the expansion I/O Card)
1412 DO2X (Digital Output 2 of the expansion I/O Card)
1414 DO3X (Digital Output 3 of the expansion I/O Card)
1416 DO4X (Digital Output 4 of the expansion I/O Card)
1418 DO5X (Digital Output 5 of the expansion I/O Card)
1420 DO6X (Digital Output 6 of the expansion I/O Card)
1422
DO7X (Digital Output 7 of the expansion I/O Card)
1424 DO8X (Digital Output 8 of the expansion I/O Card)
1426 DO9X (Digital Output 9 of the expansion I/O Card)
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
27.2.8 11616 PI Out Connection ENUM 1800 1800 1852 W VS
Use this parameter to configure the analog output of the controller that distributes the Vref speed reference to
follower drives. The reference is the same for all follower drives. With reference to figure 1, the analog output
is Vref.
1800 AO1 (Analog Output 1)
1802 AO2 (Analog Output 2)
1850 AO1X (Analog Output 1 of the expansion I/O Card)
1852 AO2X (Analog Output 2 of the expansion I/O Card)