gefran ADV200 WA, Functions Description And Parameters List

Page: 161 / 300

ADV200 WA • Functions description and parameters list
161
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.10.9 7796 Clean fwd time s UINT16 10 0 1000 RW VS
Setting of the duration of cleaning in the normal direction of rotation during the pump cleaning function, calcu-
lated from when the speed is reached.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.10.10 7798 Clean rev time s UINT16 10 0 1000 RW VS
Setting of the duration of cleaning in the reverse direction of rotation during the pump cleaning function, calcu-
lated from when the speed is reached.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.10.11 7800 Clean acc time s UINT16 5 1 1000 RW VS
Setting of the time within which the motor must reach the speed of rotation during the pump cleaning proce-
dure.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.10.12 7802 Clean dec time s UINT16 16BIT 5 1 1000 R VS
Setting of the time within which the motor must reach zero speed during the pump cleaning procedure.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.10.13 7804 Clean stop time s UINT16 5 0 1000 RW VS
Setting of the stop time between rotations and at the end of the pump cleaning cycle.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.10.14 7806 Clean period time h UINT16 0 0 30000 RW VS
Setting of the interval of time between two cleaning cycles (if the function is not controlled by digital input or
analog signal).
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.10.15 7778 Clean period mon h UINT16 0 0 0 R VS
This parameter shows the time elapsed from the last cleaning of the activated pump from the timed mode
(parameter setting 7806 > 0).
When the displayed time exceeds the scheduled period (par 7806), a pump cleaning cycle is started. When
the pump cleaning is controlled by a digital inlet or an analogic reference, at its end this parameter is reset
and the elapsed time count starts again.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.10.16 7814 Clean active mon ENUM Not active 0 4 R VS
This parameter can be used to know whether a pump cleaning cycle is in progress and which command gen-
erated it.
0 Not active
1 On start
2 Digital src
3 Analog src
4 Period src