gefran ADV200 WA, Functions Description And Parameters List, Page: 156 / 300

156
ADV200 WA • Functions description and parameters list
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.7.3 7474 Fill speed time s INT16 0.0 0.0 3600.0 RW VS
Setting of the duration of horizontal pipe fill. If this parameter is set to 0 the drive does not perform this pipe fill
stage.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.7.4 7476 Fill setpoint PID1U FLOAT 0.0 CALCF CALCF RW VS
Setting of the value that the reference must reach during vertical pipe fill, with a constant slope. If this param-
eter is set to 0 the drive does not perform this pipe fill stage.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.7.5 7478 Fill time s INT16 0.0 0.0 3600 RW VS
Setting of the duration of vertical pipe fill. During this time the reference is brought to the value entered in
parameter 7476 Fill setpoint .
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.7.6 7492 Fill enable src LINK 16BIT 7470 0 16384 ERW VS
Disable the Fill function via an external source, to avoid the filling of the tubes at each start of the pump (de-
fault).
Changed the default setting, the Fill function will be activated only when are active both PAR 7470
Fill enable
and the source associated to PAR 7492 Fill enable src .
In this way it could, for example via a digital input, fill a plant only the first time and skip the filling subsequent
times when it is already full.