gefran ADV200 WA, Functions Description And Parameters List, Page: 65 / 300

ADV200 WA • Functions description and parameters list
65
1
2
3
+10V
-10V
0V
Internal V
1
2
3
Par.
1858 (1860) = 1
Par.
1858 (1860) =
0,5
Par.
1858 (1860) = -1
Stp Var x par. 1858 (1860)
Vout = 10 x
( )
FS Var
where:
Vout output voltage on the card terminals.
Stp Var actual value of the variable (variable unit)
SF Var full scale of the variable (variable unit)
Example of calculation of the Analog out Xx scale factor
To display the drive speed, use an analog instrument with field of measurement from 0 ... 2V. This means that,
to display the speed of the drive, a voltage of 2V on the analog output of the drive must correspond to the
maximum speed. With a scale factor of 1 this would be 10V (Scale factor = 2V / 10 V = 0.200).
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
15.18 1866 Analog out 1X mon cnt INT16 0 0 0 ER VS
The actual value of the voltage present on analog output 1 of the expansion card is displayed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
15.19 1868 Analog out 2X mon cnt INT16 0 0 0 ER VS
The actual value of the voltage or current present on analog output 2 of the expansion card is displayed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
15.20 1874 An out 1X absolute ENUM Disable 0 1 ERW VS
15.21 1876 An out 2X absolute ENUM Disable 0 1 ERW VS
Enables the relative analog output as an absolute value. If this parameter is set to 1 the voltage on the analog
output assumes the value of 0 - 10V regardless of the sign of the command signal.
0 Disable
1 Enable
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
15.22 1882 Analog out 1X min cnt INT16 0 -32768 +32767 ERW VS
15.23 1884 Analog out 1X max cnt INT16 16384 -32768 +32767 ERW VS
Setting of the minimum and maximum values for the analog output for the voltage present on analog output 1
of the expansion card.