GEA Ariete NS3015P, Instruction Manual

Page: 98 / 337

Use and maintenance instructions
This manual is the property of GEA Niro Soavi. Any reproduction, even in part, is prohibited.
4C010E6C
GEA Niro Soavi 4.2.1
2UGLQDU\PDLQWHQDQFHRSHUDWLRQV
Here below are the tables showing the periodical maintenance required by the machine to operate
HI¿FLHQWO\DQGVDIHO\
Values shown refer to a normal use of the machine; heavy-duty conditions or particularly abrasive/
aggressive products may reduce sensibly the life of some parts, which should therefore be checked
more frequently.
In case of machine malfunction or abnormal noise, we suggest you try to identify the components
which seem to produce the noise and check whether they have been correctly assembled and
tightened or whether they might be worn and in need of replacement.
In particular, machines operatine on very high pressure (over 600 bar) require frequent servicing
to replace gaskets, plunger seals, delivery valves, valve seats and springs, homogenizing valves,
depending on the type of product used – see the Table of Periodical Maintenance for high pressure
machines – in addition to regular checks.
All the operations listed here below are described with detailed procedures in the following paragraphs.
Execute carefully all the checks prescribed in these tables and note scrupulously the DATE,
MACHINE HOURS, OPERATOR in the Tables for the checks to be performed every 1500 HOURS
- 6 MONTHS and every 3000 HOURS - 12 NONTHS. In this way the machine will be maintained
in the best conditions of running and safety, and a track will be kept of the maintenance operations
actually completed.
WARNING
7KH3HULRGLFDO0DLQWHQDQFHWDEOHVVKRZQEHORZUHIHUWRQRUPDORSHUDWLQJFRQGLWLRQVDQG
LQDQ\FDVHSURYLGHPHUHO\DQLQGLFDWLRQDVWRWKHDYHUDJHOLIHRIDFRPSRQHQWDQGQRWD
JXDUDQWHHRIPLQLPXPFRPSRQHQWOLIH
6SHFLDOFRQGLWLRQVVXFKDVKLJKRSHUDWLQJSUHVVXUHKLJKWHPSHUDWXUHVWHDPVWHULOL]DWLRQ
DQGIUHTXHQWZDVKLQJLQFRUUHFWRSHUDWLQJSURFHGXUHVFDQVXEVWDQWLDOO\DIIHFWWKHOLIHRIWKH
PDFKLQHDQGRILWVFRPSRQHQWVDQGWKHUHIRUHWKHLQWHUYDOVVXJJHVWHGIRUPDLQWHQDQFHRI
FRPSUHVVLRQKHDGFRPSRQHQWVPD\YDU\VLJQL¿FDQWO\
As additional tool for ordinary maintenance of the machine, please refer to the form “checklist
for machine inspection” at Section 5 – SPARE PARTS LIST.