GEA Ariete NS3015P, Instruction Manual

Page: 92 / 337

Use and maintenance instructions
This manual is the property of GEA Niro Soavi. Any reproduction, even in part, is prohibited.
4C010E6C
GEA Niro Soavi 4.1.2
,QVWUXFWLRQVIRUFRUUHFWPDLQWHQDQFH
)RUDGHTXDWHPDLQWHQDQFHRSHUDWLRQV
Use only original spare parts and tools suited for the purpose and in good condition.
Respect the frequency intervals indicated in the maintenance manual for preventive and periodic
maintenance; the interval (indicated as time or work cycles) between maintenance procedures is
intended as the maximum and should not be exceeded. This interval can be shortened if needed .
Corrective preventive maintenance is based on constant attention and continuous monitoring of the
PDFKLQH3URPSWO\FKHFNDQ\DQRPDOLHVVXFKDVH[FHVVLYHQRLVHRYHUKHDWLQJOHDNLQJRIÀXLGVHWF
and apply the required remedy.
If in doubt, contact the manufacturer.
To perform maintenance operations correctly, please refer to the attached documents, such as:
1) – Functional diagrams for electrical equipment and auxiliary equipment, with indications on power
connections.
2) – List of possible failures and solutions suggested (chapter 8 in this manual).
0DLQWHQDQFHSODQ
From a construction point of view, the operations regard mechanical and electrical parts.
For practical reasons, the operations are grouped according to time criteria and complexity. Therefore
every operation or group of operations may deal with mechanical or electrical aspects.
Ordinary maintenance is divided into two categories:
• scheduled ordinary (or preventive) maintenance.
•
RUGLQDU\PDLQWHQDQFHLQUHVSRQVHWRDVSHFL¿FFRQGLWLRQ
Scheduled ordinary maintenance (also referred to as periodic or preventive) includes inspections,
checks and operations designed to prevent shutdowns and failure through a systematic control
program:
• machine lubrication
• condition of wear parts
2UGLQDU\PDLQWHQDQFHLQUHVSRQVHWRDVSHFL¿FFRQGLWLRQUHJDUGVPDFKLQHFRPSRQHQWVWKDWDUH
not subject to periodic checks and whose wear cannot be estimated beforehand. These need to be
checked or replaced when their condition requires it.