GEA Ariete NS3015P, Instruction Manual

Page: 335 / 337

According to law P service Srl considers this document to be a company secret and therefore prohibits any person to reproduce or disclose it or make it known in whole or in
part to other parties or to competitors without specific written authorization of P service's Management. Pag 13 di 14
1.0.0
MINICENTRALE OLEODINAMICA MINI HYDRAULIC POWER UNIT
DECLARATION OF INCORPORATION
P SERVICE SRL
VIA DEL MELLA, 37 (Z.I. FORNACI)
25131 BRESCIA
As the manufacturer states that the almost-machine:
MINI HYDRAULIC POWER UNIT
Cod. Z12HPMCRPPR150004
–
Serial Number PPPR-15-11/-876÷885
to which this declaration relates is in conformity with the essential safety requirements set out in Annex I to
European Union Directive 2006/42/EC on the safety of machinery
1.1.5 Planning the machine purposes of handling 1.5.1 Electric energy
1.3.1 Danger of loss of stability 1.5.4 Error of mounting
1.3.2 Danger of break up during the operation 1.5.9 Vibrations
1.3.4 Danger due a surfaces, edges or corners 1.7.3 Marking the machine
In addition, the competent technical documentation has been completed in accordance with Annex VII Part B
The plant in question must not be put into service until the final unit in which to be
incorporated has been declared in conformity with all provisions of the
abovementioned Directive 2006/42/EC on the safety of machinery.
The almost-machine is also in line with European Union Directive:
- 2006/95/CE about electrical equipment for low voltage;
- 97/23/CE PED about pressure equipment,
With this, the manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, all relevant information on
the almost -machine in question.
The almost-machine is also conforms to the following standards:
EN 12100-1:2010 Safety of machinery - Basic concepts, general principles for design. Part 1 - terminology, methodology.
EN 12100-2:2010 Safety of machinery - Basic concepts, general principles for design. Part 2 - Technical principles and specifications
EN 60204-1:2005 Electrical equipment of machines. Part 1 - General Requirements - Annex A1
EN ISO 4413:2012 Hydraulic systems components
EN ISO 4414:2012 Systems of pneumatic components
We declare that the person empowered to draw up the relevant technical documentation on behalf of P Service SRL is Mr. Paolo Benini
Brescia, 11/2015
P Service Brescia S.r.l.
Paolo Benini
EN