GEA Ariete NS3015P, Instruction Manual

Page: 38 / 337

Use and maintenance instructions
This manual is the property of GEA Niro Soavi. Any reproduction, even in part, is prohibited.
2C002E9C
GEA Niro Soavi 2.1.12
ATTENTION
The discharge pipe MUST ALWAYS be directed downwards, to prevent hazards for operators;
the Purchaser is responsible for providing a suitable product collection sump connected to
drainage.
ATTENTION
The discharged product must be disposed of properly, in compliance with current regulations
in force in the country where the machine is installed.
ATTENTION
Triggering of the overpressure valve can cause damage to the safety valve seal with
consequent reduction of the opening value set during the calibration phase. It might therefore
prove necessary to replace the seat and ball after a number of opening events, in order to
restore the original operating conditions
Washing
:DVKLQJRIWKH]RQHLQFRQWDFWZLWKWKHSURGXFWZLWKFORVHGRYHUSUHVVXUHYDOYHQRUPDOO\WDNHV
SODFHGXULQJWKHPDFKLQHZDVKLQJSKDVH&,3
ATTENTION
After triggering of the valve due to the calibration pressure having been exceeded, the valve
MUST ALWAYS be removed from its position and cleaned manually.
ATTENTION
Do not disassemble the valve body and do not remove the plastic cap. It is prohibited
to change the safety valve set value; doing so will invalidate the guarantee and affect
protection of the machine, of its components and of operators.