GEA Ariete NS3015P, Instruction Manual

Page: 152 / 337

Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
4C091E11C
GEA Niro Soavi 1
4.9. Lubrication
Proper machine lubrication is required to guarantee its correct operation.
For this reason it is absolutely necessari to follow directions for oil change intervals (see Charter 4.2),
WKHFOHDQLQJRUUHSODFHPHQWRI¿OWHUVFKHFNRIRLOOHYHODQGXVHRIVSHFL¿HGOXEULFDWLQJRLO
The lubrication system can be either FORCED or SPLASH, depending on the machine model; see
6HFWLRQ±7(&+1,&$/63(&,),&$7,216WR¿QGRXWW\SHRIOXEULFDWLRQXVHG
For top-ups and oil changes use ONLY one of the oils indicated in document TT-0038, attached to
section 1 of this manual; the same table indicates the capacity of the lubrication plant for the various
models according to the type of lubrication.
ATTENTION:
The lubrication oil is suitable for operating temperatures ranging from 5°C and +40°C: please
contanct GEA Niro Soavi Customer Service to obtain the type of lubricant suitable for any
VSHFL¿FFRQGLWLRQVIRXQGORFDOO\
ATTENTION:
Used oils are extremely harmful to environment and should be disposed of correctly, in
accordance with the local regulations.
ATTENTION:
All inspection and maintenance operations must be carried out with the MACHINE NOT
IN OPERATION; the power mains switch must be LOCKED IN THE OFF POSITION (with a
padlock) for the safety of personnel.
It is important to periodically ensure there is no foam in the oil as this is a sign that air is being
incorporated due to cavitation in the oil pump or to bad sealing of the lubrication circuit. You also
QHHGWRFKHFNIRUDZKLWLVKZDWHURLOHPXOVLRQZKLFKLVFDXVHGE\LQHI¿FLHQWGUDLQDJHRIFRQGHQVDWH
RUZDWHULQ¿OWUDWLRQVLQVLGHWKHERG\IDXOW\ZDWHURLOH[FKDQJHURUZRUQJXLGHSOXQJHUJDVNHWV
$Q\W\SHRIRLOXVHGVKRXOGKDYHWKHIROORZLQJVSHFL¿FDWLRQV
Suitable for hydraulic circuits, of mineral origin, viscosity ISO VG 150 (150 cSt at 40°C) with non-
IRDPLQJDQWLR[LGDWLYHDGGLWLYHVHWF
The list of recommended oils, including food-grade oils, is given in document TT-0038 attached to
Section 1 of this manual.