GEA Ariete NS3015P, Instruction Manual

Page: 165 / 337

Use and maintenance instructions
This manual is the property of GEA Niro Soavi. Any reproduction, even in part, is prohibited.
5C001E4C
GEA Niro Soavi 5.4
5.3. Recommended spare parts
In order to limit the number of shutdowns during production, and the time required for maintenance of
the machine, we recommend you stock a set of spare parts to replace elements which are normally
subject to wear.
The number of spare parts to be stocked will depend on production needs and on how important it is
to avoid long shutdowns due to unavailable spare parts.
,Q VSHFL¿F LQ FDVH RI KRPRJHQL]LQJ YDOYHV WKH UHSODFHPHQW DW GXH WLPH DOORZV WR NHHS WKH
KRPRJHQL]LQJHI¿FLHQF\DQGFRQVHTXHQWO\WKHTXDOLW\RIWKHSURFHVVHGSURGXFW
GEA Niro Soavi cannot guarantee that a given spare part will be in stock either at their central
warehouse or at the Dealer’s due to problems with material availability or to special requirements
for dispatch.
Please note that shipment is no guarantee of successful delivery and that delays may occurr due
to customs problems or miscarriage.
In any case GEA Niro Soavi shall not be responsible for delays occurring due to the shipment of
spare parts.
The following is a list of spare parts which, in our experience, is important to have in stock:
• a complete set of gaskets, two sets in case of VHP high-pressure compression blocks
• two sets of packings, including packing washers and anti-extrusion rings
• one or two plungers, if ceramic plungers are used
• a homogenizing valve set for each stage (for homogenizers)
• a set of balls and valve seats, for VHP high-pressure heads
• a set of seats and pumping valves, if the machine is used with abrasive products
• a set of pumping valve springs
• a pressure gauge for the compression block
• seat and ball for overpressure relief valve
‡ RLO¿OWHUV
• a set of guide plunger gaskets
• crankshaft oil guard
In addition to the ordinary maintenance operations described in Section 4 - MAINTENANCE, below
\RXZLOO¿QGDWDEOHZLWKFKHFNOLVWIRUPDFKLQHLQVSHFWLRQWKDW\RXFDQXVHWRFKHFNZKLFKVSDUHSDUWV
are needed before performing ordinary maintenance on the machine.