manualshive.com logo in svg

GE L60, Instructions Manual

The GE L60 is a highly efficient and reliable device designed to meet your diverse power generation needs. To ensure optimal operation, it is vital to have its user-friendly Instruction Manual. You can download this comprehensive manual for free at manualshive.com, allowing you to take full advantage of your GE L60's features and functionalities.

Share
Download
background image

5-134

L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL

PRODUCT SETUP

CHAPTER 5: SETTINGS

5

This menu is used to enter user-defined text and user-selected Modbus-registered data fields into the particular user 
display. Each user display consists of two 20-character lines (top and bottom). The tilde (~) character is used to mark the 
start of a data field – the length of the data field needs to be accounted for. Up to five separate data fields can be entered 
in a user display – the 

n

th tilde (~) refers to the 

n

th item.

A user display can be entered from the front panel keypad or the EnerVista interface (preferred for convenience). The 
following procedure shows how to enter text characters in the top and bottom lines from the front panel keypad:
1.

Select the line to be edited.

2.

Press the decimal key to enter text edit mode.

3.

Use either 

VALUE

 key to scroll through the characters. A space is selected like a character.

4.

Press the decimal key to advance the cursor to the next position.

5.

Repeat step 3 and continue entering characters until the desired text is displayed.

6.

The 

HELP

 key can be pressed at any time for context sensitive help information.

7.

Press the 

ENTER

 key to store the new settings.

To enter a numerical value for any of the five items (the 

decimal form

 of the selected Modbus address) from the front panel 

keypad, use the number keypad. Use the value of “0” for any items not being used. Use the 

HELP

 key at any selected 

system display (setting, actual value, or command) which has a Modbus address, to view the 

hexadecimal form

 of the 

Modbus address, then manually convert it to decimal form before entering it (EnerVista usage conveniently facilitates this 
conversion).
Use the 

MENU

 key to go to the user displays menu to view the user-defined content. The current user displays show in 

sequence, changing every four seconds. While viewing a user display, press the 

ENTER

 key and then select the ‘Yes” option 

to remove the display from the user display list. Use the 

MENU

 key again to exit the user displays menu.

An example of user display setup and result is shown as follows.

If the parameters for the top line and the bottom line items have the same units, then the unit is displayed on the bottom 
line only. The units are only displayed on both lines if the units specified both the top and bottom line items are different.

  USER DISPLAY 1

 

DISP 1 TOP LINE:

Current X  ~  A

Shows user-defined text with first tilde marker

DISP 1 BOTTOM LINE:

Current Y  ~  A

Shows user-defined text with second tilde marker

DISP 1 ITEM 1:

6016

Shows decimal form of user-selected Modbus register 

address, corresponding to first tilde marker

DISP 1 ITEM 2:

6357

Shows decimal form of user-selected Modbus register 

address, corresponding to second tilde marker

DISP 1 ITEM 3:

0

This item is not being used. There is no corresponding 

tilde marker in top or bottom lines.

DISP 1 ITEM 4:

0

This item is not being used. There is no corresponding 

tilde marker in top or bottom lines.

DISP 1 ITEM 5:

0

This item is not being used. There is no corresponding 

tilde marker in top or bottom lines.

 USER DISPLAYS

Current X  0.850

Current Y  0.327 A

Shows the resultant display content

Summary of Contents for L60

































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for L60

Watts 800 Series Instructions For Installing preview
800 Series
Brand: Watts Pages: 2
Samson 430 Series Mounting And Operating Instructions preview
430 Series
Brand: Samson Pages: 78
Rachio 3 Get Started preview
3
Brand: Rachio Pages: 16
Canon imageRUNNER ADVANCE C9075S PRO User Manual preview
imageRUNNER ADVANCE C9075S PRO
Brand: Canon Pages: 20
Cabletron Systems SmartSwitch 6000 Installation & User Manual preview
SmartSwitch 6000
Brand: Cabletron Systems Pages: 76
Danfoss vlt soft starter mcd 500 Operating Instruction preview
vlt soft starter mcd 500
Brand: Danfoss Pages: 95
Danfoss EKE 347 Installation Manual preview
EKE 347
Brand: Danfoss Pages: 12
Danfoss VLT 5000 Instruction Manual preview
VLT 5000
Brand: Danfoss Pages: 33
Danfoss VLT 6000 Installation Manual preview
VLT 6000
Brand: Danfoss Pages: 59
Danfoss EKC 361 User Manual preview
EKC 361
Brand: Danfoss Pages: 16
Danfoss VLT AQUA Drive FC 200 Operating Instructions Manual preview
VLT AQUA Drive FC 200
Brand: Danfoss Pages: 91
Danfoss EvoFlat WSS Installation Manual preview
EvoFlat WSS
Brand: Danfoss Pages: 2
Danfoss FC 300 Operating Instructions Manual preview
FC 300
Brand: Danfoss Pages: 100
Danfoss FC 300 Operating Instruction preview
FC 300
Brand: Danfoss Pages: 82
Danfoss Optyma Plus User Manual preview
Optyma Plus
Brand: Danfoss Pages: 18
Danfoss AMV 438 SU Installation Manual preview
AMV 438 SU
Brand: Danfoss Pages: 12
Danfoss OPTYMA Plus OP-LPQM Manual preview
OPTYMA Plus OP-LPQM
Brand: Danfoss Pages: 8
Data I/O PSV5000 Operator'S Manual preview
PSV5000
Brand: Data I/O Pages: 88

Brands by name

Popular brands

Load more brands