manualshive.com logo in svg

GE L60, Instructions Manual

The GE L60 is a highly efficient and reliable device designed to meet your diverse power generation needs. To ensure optimal operation, it is vital to have its user-friendly Instruction Manual. You can download this comprehensive manual for free at manualshive.com, allowing you to take full advantage of your GE L60's features and functionalities.

Share
Download
background image

CHAPTER 5: SETTINGS

PRODUCT SETUP

L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL

5-69

5

TxGOOSE1 DatSet

Range: None, TT6DataSet1,TT6 DataSet2, … TT3DataSet01,TT3 DataSet02, …
Default: None

This setting selects the published data set using the UR Setup software designator for the data set. If None is selected, 
no TxGOOSE1 messages are sent.
The IEC 61850 name of the data sets are configured in the Datasets panel, as described later.
Some datasets are designed for the TT6 transfer time class (3 ms), while others are designed for the TT3 class (100 ms). 
The performance of a TxGOOSE is determined by its dataset. Use TT6 datasets for trips and blocking applications, TT3 
datasets for slow automatic interactions. The 61850 name of the datasets are configured in the Datasets panel.
An ObjectReference to the data set, which consists of the concatenation of the string "<LDName>/LLN0." and the data 
set name, is published in the datSet field of TxGOOSE1 messages and can be used by subscribers to discriminate 
TxGOOSE1 messages from other GOOSE messages. <LDName> is a syntactic variable that is set to the value of setting 
Master functional ldName if one or more characters have been entered to that setting, otherwise the value of setting IED 
NAME suffixed with "Master".
To configure a DataSet, select it at the top of the window from the drop-down list. In the lower part of the window, drag 
and drop configuration items to the right side. Dataset members configured here affect other Report or TxGOOSE 
control blocks that use the same DataSet.
The performance of the TxGOOSE is determined by the performance of the selected dataset. When the selection is 
TT3DataSet01, TT3DataSet02, … it is possible that transient events can be missed.

TxGOOSE1 DST MAC

Range: any 12 digit hexadecimal number
Default: 01-0C-CD-01-00-00

When the 

TxGOOSE1 MODE

 setting is R-GOOSE, the 

TxGOOSE1 DST MAC

 address is set to 00 00 00 00 00 00 and cannot be 

changed. Otherwise, the value entered here sets the Ethernet destination Media Access Control (MAC) address in 
published TxGOOSE1 messages. As the standard requires that the address have the multicast bit set TRUE, that is to say 
the second digit is set to an odd number, messages transmitted have the multicast bit set TRUE no matter its value in 
this setting.
The destination MAC address can be used by the network to restrict message delivery to selected devices that need to 
receive them, reducing network load. This address also can be used by hardware in receiving devices to filter out 
messages that are of no interest to them, reducing processor burden. Different filtering algorithms are implemented by 
different devices. The standard recommends that the algorithm used by hardware of the receiving device be considered 
when assigning destination multicast addresses.
Subscribers can use this address to discriminate TxGOOSE1 messages from other GOOSE messages.

TxGOOSE1 VLAN PRIORITY

Range: 0, 1, 2, 3, 4, 5, 6, 7, 5-4, 6-4, 6-5, 7-4, 7-5, 7-6
Default: 4

When the value entered is 0, 1, 2, 3, 4, 5, 6, or 7, the User Priority value in the IEEE 802.1Q VLAN tag included in published 
TxGOOSE1 messages is set to that value. When one of the two-digit values is entered, the dynamic priority feature is 
selected: the first event message has the User Priority value of the first digit, and User Priority is decremented in each 
following message until reaching the value of the second digit. For instance, if the selected value is 7-5, then the User 
Priority values in successive messages beginning with the message triggered by an event is 7, 6, 5, 5, 5, 5, 5, and so on. 
Do not make a dynamic priority selection when standard behavior is required.
Network devices can forward a message with a higher priority value before a message with a lower priority value, which 
speeds delivery of high-priority messages in heavily loaded networks. The standard recommends that higher-priority 
messages, such as GOOSE, have priority values in the range of 4 to 7.

TxGOOSE1 VLAN ID

Range: 0 to 4095 in steps of 1
Default: 0

The value entered sets the VID value in the IEEE 802.1Q VLAN tag included in published TxGOOSE1 messages. VID can be 
used by network devices to direct messages to only selected devices, reducing network burden. VID values of 0 and 1 
are assigned by IEEE 802.1Q to other functions and are not to be used for GOOSE.

Summary of Contents for L60

































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for L60

Ebyte E180-Z5812SP Product Manual preview
E180-Z5812SP
Brand: Ebyte Pages: 35
VAT 620 Series Installation, Operating, & Maintenance Instructions preview
620 Series
Brand: VAT Pages: 26
Watts 2300 Series Installation Instructions Manual preview
2300 Series
Brand: Watts Pages: 12
Lancom GS-1108 Manual preview
GS-1108
Brand: Lancom Pages: 8
Neets echo plus User Manual preview
echo plus
Brand: Neets Pages: 12
National Instruments NI 9871 Operating Instructions And Specifications preview
NI 9871
Brand: National Instruments Pages: 24
IBC MVE2 Series Quick Start Manual preview
MVE2 Series
Brand: IBC Pages: 8
Parker TFP Series Operation Manual preview
TFP Series
Brand: Parker Pages: 16
ZKTeco SRB Connection Manual preview
SRB
Brand: ZKTeco Pages: 2
AAF MicroTech II UV05 Operation & Maintenance Manual preview
MicroTech II UV05
Brand: AAF Pages: 50
Linak CBH Advanced User Manual preview
CBH Advanced
Brand: Linak Pages: 33
Topway LMT070DICFWD-NJN User Manual preview
LMT070DICFWD-NJN
Brand: Topway Pages: 34
Moeller F&G Xcomfort CRCA-00/02 Assembly Instructions preview
F&G Xcomfort CRCA-00/02
Brand: Moeller Pages: 4
Quickie DX2-REM550 User Manual preview
DX2-REM550
Brand: Quickie Pages: 64
Kamstrup 66-0F-000-100 Installation Manual preview
66-0F-000-100
Brand: Kamstrup Pages: 7
ISVT IVC3100 Instruction Manual preview
IVC3100
Brand: ISVT Pages: 78
Linear Technology LT8610A Demo Manual preview
LT8610A
Brand: Linear Technology Pages: 8
Precision PW66 User Manual preview
PW66
Brand: Precision Pages: 8

Brands by name

Popular brands

Load more brands