GE CIC Pro, Service Manual

Page: 98 / 314

6-4 CIC Pro™ 2026419-033E
Configuration
NOTE
The information in the sample output represents the data format only.
Therefore, do not attempt to analyze these IP addresses versus any errors
reported.
--- Results for checkCentrals -tz ---
Gathering Central Station information currently on the Unity network...
..........UU..U..
Unit|Name Version MC IP Addr IX IP Addr
---------- ------- --------- ---------
ANNEX|BCM v4.0 126.4.74.10 121.121.121.121
ANNEX|KAZ0 v5.0 126.126.126.156 8.20.94.58
ANNEX|KAZ1 v5.0 126.126.126.157 8.20.94.45
ANNEX|REN v5.0 126.1.4.44 7.20.93.33
ANNEX|SAF v5.0 126.1.4.5 7.20.87.149
DCM|CIC2 v5.0 126.1.99.121 1.20.101.188
DFR|CIC v4.0 126.1.244.167 192.168.1.10
GEHC|BA1 v5.0
126.4.72.68 7.20.88.69
ICU|CIC v4.1 126.1.75.28 192.168.63.56
ICU|MAX v5.0 126.1.1.1 192.168.1.1
ICU|SV5 v4.0 126.21.65.103 ** Unknown **
ICUX|DFR v3.0 126.2.73.199 ** Unknown **
Assessing remote Central Stations for...
- Integrity of the IX settings
- DayLight Savings Setting
- Time Zone Setting
X.F..XX.XXUU.XUFX
************************************
***** Central Station Summary ******
************************************
**** Network Based Errors ****
'Unknown' IX IP Address Errors
----------------------
1:
ICU|SV5
2: ICUX|DFR
3: ORSOUTH|JJO
'Unknown' Error- Address has not been configured
Not able to perform any remote checks for these systems.
'No Path' to the IX IP Address Errors
----------------------
1:
ANNEX|BCM
2: DCM|CIC2
3: DFR|CIC
4: ICU|CIC
5: ICU|MAX
6: ORNORTH|AGI
'No Path' Error- Address that does not have a physical
path (i.e. unplugged Network cable) or network settings
are such that the address cannot be accessed (i.e. ping fails)
Not able to perform any remote checks for these systems.
'No Access' to the remote IX IP Address Errors
----------------------
1:
ANNEX|KAZ1
'No Access' Error- Address is correctly configured but
the central station is preventing access. This will most often
occur because that device is behind a software firewall.
Not able to perform any remote checks for these systems.
************************************
Remote Assessment Results
************************************
Daylight Savings Time (DTS) Failures
-------------------------
No 'DST' errors detected for the devices that could be contacted
TimeZone Failures
-----------------
No 'TZ' errors detected for the devices that could be contacted
******************************
** Local System Information **
TimeZone = Central Standard Time
Automatic DTS = FALSE
******************************
-------------------------------------------------------------------------