GE CIC Pro Service Manual Download Page 109

Page: 109 / 314

Configuration

2026419-033E

CIC Pro™

6-15

With the laser printer physically connected to the CARESCAPE Network IX
network, turn on the power to the laser printer.

Click

Install Laser Printer

In the

Printer’s IP Address

field, type the IP address assigned to the printer.

NOTE

It is recommended that the assigned IP addresses of the printers be
maintained at the site for future reference.

NOTE

If the IP address is not specified or if it has not valid, the following error will
be displayed:

Printer Type

, select the default printer driver

HP Universal Printing PS

NOTE

This driver will support the currently released printers listed on page

2-9

Printer Name

, type a name for the printer (up to 29 characters).

NOTE

If a printer name is not specified, the following error will be displayed:

If desired, in the

Comment

field, type a comment about the printer (up to 29

characters).

In the

Test Page

field, choose

Yes

to print a test page.

Summary of Contents for CIC Pro



























































































































































































































































































































Search results

Summary of Contents for CIC Pro

Reviews:

Related manuals for CIC Pro

Brands by name

Popular brands

GE CIC Pro, Service Manual

Search results

Summary of Contents for CIC Pro

Reviews:

Related manuals for CIC Pro

Brands by name

Popular brands