GE Digital Energy L30, Instruction Manual, Page: 550 / 644

B-86 L30 Line Current Differential System GE Multilin
B.4 MEMORY MAPPING APPENDIX B
B
F504
BITFIELD: 3-PHASE ELEMENT STATE
F505
BITFIELD: CONTACT OUTPUT STATE
0 = Contact State, 1 = Voltage Detected, 2 = Current Detected
F507
BITFIELD: COUNTER ELEMENT STATE
0 = Count Greater Than, 1 = Count Equal To, 2 = Count Less Than
F509
BITFIELD: SIMPLE ELEMENT STATE
0 = Operate
F510
BITFIELD: 87L ELEMENT STATE
F511
BITFIELD: 3-PHASE SIMPLE ELEMENT STATE
0 = Operate, 1 = Operate A, 2 = Operate B, 3 = Operate C
F515
ENUMERATION ELEMENT INPUT MODE
0 = Signed, 1 = Absolute
F516
ENUMERATION ELEMENT COMPARE MODE
0 = Level, 1 = Delta
F518
ENUMERATION: FLEXELEMENT UNITS
0 = Milliseconds, 1 = Seconds, 2 = Minutes
F519
ENUMERATION: NON-VOLATILE LATCH
0 = Reset-Dominant, 1 = Set-Dominant
F522
ENUMERATION: TRANSDUCER DCMA OUTPUT RANGE
0 = –1 to 1 mA; 1 = 0 to 1 mA; 2 = 4 to 20 mA
F523
ENUMERATION: DNP OBJECTS 20, 22, AND 23 DEFAULT
VARIATION
F524
ENUMERATION: DNP OBJECT 21 DEFAULT VARIATION
F525
ENUMERATION: DNP OBJECT 32 DEFAULT VARIATION
bitmask element state
0 Pickup
1 Operate
2 Pickup Phase A
3 Pickup Phase B
4 Pickup Phase C
5 Operate Phase A
6 Operate Phase B
7 Operate Phase C
bitmask 87L Element State
0 Operate A
1 Operate B
2 Operate C
3 Received DTT
4 Operate
5 Key DTT
6 PFLL FAIL
7 PFLL OK
8 Channel 1 FAIL
9 Channel 2 FAIL
10 Channel 1 Lost Packet
11 Channel 2 Lost Packet
12 Channel 1 CRC Fail
13 Channel 2 CRC Fail
bitmask default variation
0 1
1 2
2 5
3 6
bitmask Default Variation
0 1
1 2
2 9
3 10
bitmask default variation
0 1
1 2
2 3
3 4
4 5
5 7