GE Digital Energy L30, Instruction Manual, Page: 505 / 644

GE Multilin L30 Line Current Differential System B-41
APPENDIX B B.4 MEMORY MAPPING
B
7240 Reserved 0 to 1 --- 1 F001 0
7241 ...Repeated for Neutral Directional Overcurrent 2
Disconnect Switch (Read/Write setting) (24 modules)
74A0 Disconnect switch 1 function 0 to 1 --- 1 F102 0 (Disabled)
74A1 Disconnect switch 1 name --- --- --- F206 “SW 1"
74A4 Disconnect switch 1 mode 0 to 1 --- 1 F157 0 (3-Pole)
74A5 Disconnect switch 1 open 0 to 4294967295 --- 1 F300 0
74A7 Disconnect switch 1 block open 0 to 4294967295 --- 1 F300 0
74A9 Disconnect switch 1 close 0 to 4294967295 --- 1 F300 0
74AB Disconnect switch 1 block close 0 to 4294967295 --- 1 F300 0
74AD Disconnect switch 1 phase A / three-pole closed 0 to 4294967295 --- 1 F300 0
74AF Disconnect switch 1 phase A / three-pole opened 0 to 4294967295 --- 1 F300 0
74B1 Disconnect switch 1 phase B closed 0 to 4294967295 --- 1 F300 0
74B3 Disconnect switch 1 phase B opened 0 to 4294967295 --- 1 F300 0
74B5 Disconnect switch 1 phase C closed 0 to 4294967295 --- 1 F300 0
74B7 Disconnect switch 1 phase C opened 0 to 4294967295 --- 1 F300 0
74B9 Disconnect switch 1 operate time 0 to 65.535 s 0.001 F001 70
74BA Disconnect switch 1 alarm delay 0 to 65.535 s 0.001 F003 0
74BC Disconnect switch 1 events 0 to 1 --- 1 F102 0 (Disabled)
74BD Reserved (2 items) --- --- --- --- ---
74BF ...Repeated for module number 2
Thermal Overload Protecttion (Read/Write Settings) (2 modules)
7788 Thermal Protection 1 Function 0 to 1 --- 1 F102 0 (Disabled)
7789 Thermal Protection 1 Source 0 to 5 --- 1 F167 0 (SRC 1)
778A Thermal Protection 1 Base Current 0.2 to 3 pu 0.01 F001 80
778B Thermal Protection 1 K Factor 1 to 1.2 --- 0.05 F001 110
778C Thermal Protection 1 Trip Time Constant 0 to 1000 min. 1 F001 45
778D Thermal Protection 1 Reset Time Constant 0 to 1000 min. 1 F001 45
778E Thermal Protection 1 Minimum Reset Time 0 to 1000 min. 1 F001 20
778F Thermal Protection 1 Reset 0 to 4294967295 --- 1 F300 0
7791 Thermal Protection 1 Block 0 to 4294967295 --- 1 F300 0
7793 Thermal Protection 1 Target 0 to 2 --- 1 F109 0 (Self-reset)
7794 Thermal Protection 1 Events 0 to 1 --- 1 F102 0 (Disabled)
7795 Reserved (2 items) --- --- --- F001 0
7797 Repeated for Thermal Protection 2
Broken conductor detection (Read/Write Settings) (6 modules)
77AA Broken Conductor 1 Function 0 to 1 --- 1 F102 0 (Disabled)
77AB Broken Conductor 1 Source 0 to 5 --- 1 F167 0 (SRC 1)
77AC Broken Conductor 1 I2/I1 Ratio 20 to 100 % 0.1 F001 200
77AD Broken Conductor 1 I1 Minimum 0.05 to 1 pu 0.01 F001 10
77AE Broken Conductor 1 I1 Maximum 0.05 to 5 pu 0.01 F001 150
77AF Broken Conductor 1 Pickup Delay 0 to 65.535 s 0.001 F001 20000
77B0 Broken Conductor 1 Block 0 to 4294967295 --- 1 F300 0
77B2 Broken Conductor 1 Target 0 to 2 --- 1 F109 0 (Self-reset)
77B3 Broken Conductor 1 Events 0 to 1 --- 1 F102 0 (Disabled)
77B4 Reserved (2 items) --- --- --- F001 0
77B6 ...Repeated for Broken Conductor 2
Ohm Inputs (Read/Write Setting) (2 modules)
77F8 Ohm Inputs 1 Function 0 to 1 --- 1 F102 0 (Disabled)
77F9 Ohm Inputs 1 ID --- --- --- F205 "Ohm Ip 1 "
77FF Ohm Inputs 1 Reserved (9 items) 0 to 65535 --- 1 F001 0
7808 ...Repeated for Ohm Inputs 2
Phasor Measurement Unit Recorder Config Counter Command (Read/Write Command) (4 modules)
781A PMU 1 Recorder Clear Config Counter 0 to 1 --- 1 F126 0 (No)
Table B–9: MODBUS MEMORY MAP (Sheet 33 of 61)
ADDR REGISTER NAME RANGE UNITS STEP FORMAT DEFAULT