manualshive.com logo in svg

GE Digital Energy L30, Instruction Manual, Page: 23 / 644

Share
Download
GE Digital Energy L30 Instruction Manual Download Page 23

GE Multilin

L30 Line Current Differential System

1-13

1 GETTING STARTED

1.3 ENERVISTA UR SETUP SOFTWARE

1

Before using the Quick Connect feature through the Ethernet port, disable any configured proxy settings in Internet
Explorer.

1.

Start the Internet Explorer software.

2.

Select the 

Tools > Internet Options

 menu item and click the 

Connections

 tab.

3.

Click on the 

LAN Settings

 button to open the following window.

4.

Ensure that the “Use a proxy server for your LAN” box is not checked.

If this computer is used to connect to the Internet, re-enable any proxy server settings after the laptop has been discon-
nected from the L30 relay.

1.

Start the Internet Explorer software.

2.

Select the “UR” device from the EnerVista Launchpad to start EnerVista UR Setup.

3.

Click the 

Quick Connect

 button to open the Quick Connect dialog box.

4.

Select the 

Ethernet

 interface and enter the IP address assigned to the L30, then click the 

Connect

 button. The EnerV-

ista UR Setup software creates a site named “Quick Connect” with a corresponding device also named “Quick Con-
nect” and displays them at the upper-left of the screen. 

5.

Expand the sections to view data directly from the L30 device.

Each time the EnerVista UR Setup software is initialized, click the 

Quick Connect

 button to establish direct communica-

tions to the L30. This ensures that configuration of the EnerVista UR Setup software matches the L30 model number.

When direct communications with the L30 via Ethernet is complete, make the following changes:

1.

From the Windows desktop, right-click the 

My Network Places

 icon and select 

Properties

 to open the network con-

nections window.

2.

Right-click the 

Local Area Connection

 icon and select the 

Properties

 item.

3.

Select the 

Internet Protocol (TCP/IP)

 item from the list provided and click the 

Properties

 button.

Summary of Contents for L30





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments