Gateway e-4000 User Manual Download Page 9

Page: 9 / 260

Identifying your computer case style

www.gateway.com

Identifying your computer case
style

Use the following descriptions to identify your computer case style.

Gateway Mid Tower

Gateway Micro Tower

Gateway 4-bay Small Form Factor

The Gateway Mid Tower
case has an access
door on the front that
covers the drive bays
and other components.

For information on the
Gateway Mid Tower
case, see

“Gateway Mid

Tower Front” on page 4

The Gateway Micro
Tower has a removable
base and a silver bezel.

For information on the
Gateway Micro Tower
case, see

“Gateway

Micro Tower Front” on
page 10

The Gateway 4-bay Small Form
Factor case has a removable stand
and a black bezel.

For information on the Gateway
4-bay Small Form Factor case, see

“Gateway 4-bay Small Form Factor
Front” on page 16

Summary of Contents for e-4000





































































































































































































































































Search results

Summary of Contents for e-4000

Reviews:

Related manuals for e-4000

Brands by name

Popular brands

Gateway e-4000, User Manual

Search results

Summary of Contents for e-4000

Reviews:

Related manuals for e-4000

Brands by name

Popular brands