Gateway e-4000 User Manual Download Page 225

Page: 225 / 260

219

Troubleshooting

support.gateway.com

To set a default printer in Windows XP:

Click

Start

, then click

Control Panel

. The

Control Panel

window opens.

If your Control Panel is in Category View, click

Printers and Other

Hardware

Click/Double-click the

Printers and Faxes

icon. The

Printers and Faxes

window opens.

Right-click the name of the printer you want to be the default
printer, then click

Set as Default Printer

To set a default printer in Windows 2000:

Click

Start

Settings

, then click

Printers

Right-click on the name of the printer you want to be the default
printer, then click

Set as Default

■

Make sure that the cable between the printer and your computer is
connected securely to the correct port.

■

Check the port and cable for bent or broken pins.

■

Reinstall the printer driver. See the documentation that came with your
printer for instructions on installing the printer driver.

Summary of Contents for e-4000





































































































































































































































































Search results

Summary of Contents for e-4000

Reviews:

Related manuals for e-4000

Brands by name

Popular brands

Gateway e-4000, User Manual

Search results

Summary of Contents for e-4000

Reviews:

Related manuals for e-4000

Brands by name

Popular brands